manualshive.com logo in svg

Miele KM 6325-1, Operating And Installation Instructions

Share
Download
Miele KM 6325-1 Operating And Installation Instructions Download Page 36

Problem solving guide

36

Problem

Cause and remedy

After the hob has been

switched on 



 appears

in the display for a few

seconds.

The cooking zones do

not heat up.

Demonstration mode is activated.

 

Turn the rotary control for the front left cooking

zone anti-clockwise and hold.

 

Turn the rotary control for the right front cooking

zone twice briefly anti-clockwise and then turn an‐

ti-clockwise and hold until 



 appears in the

display.

A cooking zone

switches off automati‐

cally.

It has been operated for too long.

 

You can use the cooking zone again by switching

it back on (see "Safety switch-off").

The Booster has deacti‐

vated early automatical‐

ly.

The overheating protection mechanism has been acti‐

vated.

 

See "Overheating protection".

The cooking zone is not

working in the usual

way on the power set‐

ting selected.

The overheating protection mechanism has been acti‐

vated.

 

See "Overheating protection".

Power level 9 is auto‐

matically reduced if you

select power level 9 on

two linked cooking

zones at the same time.

Operating both zones at power level 9 would exceed

the permitted maximum power for the two zones.

 

Use a different cooking zone.

The food in the pan

does not heat up when

the Auto heat-up func‐

tion is switched on.

A large amount of food is being heated up.

 

Start cooking at the highest power level and then

turn down to a lower one manually later on.

The pan is not conducting heat properly.

 

Use a different pot or pan which conducts heat

properly.

An operating noise can

be heard after the appli‐

ance has been switched

off.

The fan will continue running until the appliance has

cooled down. It will then switch itself off automatical‐

ly.

Summary of Contents for KM 6325-1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands