manualshive.com logo in svg

Miele KM 6325-1, Operating And Installation Instructions

Share
Download
Miele KM 6325-1 Operating And Installation Instructions Download Page 25

Operation

25

Fire hazard.

Do not leave the hob unattended

whilst it is being used.

Please note that the heating up time

on induction hobs is very much

shorter than on conventional hobs.

Cooking zone rotary controls

The cooking zone rotary controls must

not be turned past B I or B I/II to 0.

Switching on

Turn the cooking zone rotary control

clockwise until the setting you want

appears in the display.

Switching off

Turn the rotary control anti-clockwise

to 0.

The power level will go out in the dis‐

play.

Residual heat indicator

If the cooking zone is still hot, the resid‐

ual heat indicator will light up after it

has been switched off.
The lines of the residual heat indicator

go out one after another as the cooking

zone cools down. The last horizontal

line only goes out when the cooking

zone is safe to touch.

Danger of burning. Do not touch

the cooking zones whilst the residual

heat indicators are lit up.

Summary of Contents for KM 6325-1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands