Miele KM 6317 Operating And Installation Manual Download Page 73

Page: 73 / 76

In the event of any faults which you cannot remedy yourself, or if the appliance is
under guarantee, please contact:

– Your Miele dealer, or

– the Miele Service Department (see back cover for address).

Please note that telephone calls may be monitored and recorded to improve
our service.

When contacting Miele, please quote the model and serial number of your
appliance. These are given on the data plate.

N.B. A call-out charge will be applied for service visits where the problem
could have been resolved as described in these instructions.

Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the front of these instructions.

After sales service, data plate

Summary of Contents for KM 6317













































































Search results

Summary of Contents for KM 6317

Reviews:

Related manuals for KM 6317

Brands by name

Popular brands

Miele KM 6317, Operating And Installation Manual

Search results

Summary of Contents for KM 6317

Reviews:

Related manuals for KM 6317

Brands by name

Popular brands