Installation
36
Natural stone countertops
You will need heavy duty double-sided
adhesive tape (not included with the
cooktop) to fasten the spring clips.
Affix the adhesive tape
along the
top edge of the cut-out in the
positions shown in the cooktop
illustration.
Position the spring clips on the top
edge of the cut-out and press them
firmly into place.
Apply silicone adhesive to the side
edges and bottom edge of the spring
clips.
Installing the cooktop
Feed the cooktop connection cable
down through the countertop cut-out.
Connect the cooktop to the oven (see
"Connection to the oven").
Position the cooktop in the
countertop cut-out.
Using both hands, press down evenly
on the sides of the cooktop until it
clicks into position. When doing this
make sure that the seal of the
appliance sits flush with the
countertop on all sides. This is
important to ensure an effective seal
all round.
If the seal does not sit flush with the
countertop in the corners, the corner
radius (
≤
R4) can be carefully cut to fit
using a jigsaw.
Never seal the cooktop using
additional sealant (e.g. silicone).
Connect the cooktop to the oven.
Check that the cooktop works.
The cooktop can only be lifted out of
the cut-out with a special tool.
