Miele KM 5954 Operating And Installation Instructions Download Page 57

Page: 57 / 60

Solid wood or tiled worktop

7.5 mm
(wooden frame - not supplied with
appliance)

Worktop

Cooktop

Gap width

Since the ceramic glass plate and
the worktop cutout have a certain
dimensional tolerance, the gap width

can vary (min. 1 mm).

Make the worktop cutout as shown in
the illustrations.

Fix the wooden frame

7 mm below

the top edge of the worktop (see
illustration).

Feed the appliance power cord
downward through the countertop
cut-out.

Place the cooktop

in the cutout

and center it.

Connect the cooktop.

Check that the cooktop is functioning
properly.

Spray the remaining gap

with a

temperature-resistant (to at least
160 °C) silicone sealant.

Observe the silicone-sealant
manufacturer's instructions. For

granite- and marble-tiled worktops

use only silicone sealant especially
formulated for granite and marble.

Flush-fitted cook tops

Summary of Contents for KM 5954





























































Search results

Summary of Contents for KM 5954

Reviews:

Brands by name

Popular brands

Miele KM 5954, Operating And Installation Instructions

Search results

Summary of Contents for KM 5954

Reviews:

Brands by name

Popular brands