manualshive.com logo in svg

Miele KM 5773, Operating And Installation Manual

Share
Download
Miele KM 5773 Operating And Installation Manual Download Page 38

A single burner or the cooktop turns automatically off.

Possible fault

Fix

The overheating protection has
reacted.

See "Overheating protection".

One of the following errors occurs:

– The booster function turns off automatically ahead of time.

– The selected power level 10, 11 or 12 flashes alternating with a lower
power level in the burner display. The lower power level is additionally
shown by the number of segments in the lighting cycle.

Possible fault

Fix

The overheating protection has
reacted.

See "Overheating protection".

The food does not cook when using auto-heat.

Possible fault

Fix

Large amounts of food are cooked. Select a higher power level or start cooking

on the highest power level and reduce the
power manually.

The pot or pan does not transfer
the heat properly.

The cooling fan continues to run after the cooktop was turned off.

Possible fault

Fix

This is not a fault.

The fan continues to run until the appliance
has sufficiently cooled. It will turn off
automatically.

Frequently asked questions

38

Summary of Contents for KM 5773









































Reviews:

No comments

Brands by name

Popular brands

Load more brands