manualshive.com logo in svg

Miele KM 5773, Operating And Installation Manual

Share
Download
Miele KM 5773 Operating And Installation Manual Download Page 37

,

Repairs should only be carried out by an authorized technician in

accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage. The manufacturer cannot be held
responsible for unauthorized work.

The cooktop or the burners cannot be turned on.

Possible fault

Fix

The cookware is not suitable.

See "Selecting cookware".

The Child Safety Lock is activated. Deactivate the Child Safety Lock.

See "Child Safety Lock".

The main fuse has blown.

Check the main fuse.
Remove the fuse or "trip" the circuit
breaker.
If neither of the above is the case,
disconnect the appliance from the
electrical supply for 1 minute.
Reconnect the power and turn the
appliance on. If it still does not heat,
contact the Miele Technical Service.

The burners do not heat but can be turned on and a power setting can be
selected.

Possible fault

Fix

The cooktop is in the demo mode.

See "Programming".

The burner display shows

ß

.

Possible fault

Fix

The burner is turned on but no
cookware is placed on it.

Turn the burner off or place suitable
cookware on the burner.

The placed cookware might not be
induction suitable and sufficient in
size.

See "Selecting cookware" for information on
type and size of cookware.

Frequently asked questions

37

Summary of Contents for KM 5773









































Reviews:

No comments

Brands by name

Popular brands

Load more brands