You can change the standard settings
of your hob (see chart).
Proceed as follows:
^
With the hob switched off, touch the
hob ON/OFF sensor
s
and the safety
lock sensor
$
at the same time
until
the indicator lamp for the safety lock
flashes.
A
P
(Programme) and a
S
(Status) will
appear in the cooking zone display with
a number which shows the current
setting (see chart).
^
To select the programme you want
touch the
+
or
-
sensor for the
front
left
cooking zone, then select the
required
status
by touching the
+
or
-
sensor for the
front right
cooking
zone (see chart). You can alter
several programmes one after the
other in this manner.
To store the new settings in
memory
,
touch the hob ON/OFF sensor
s
until
the displays go out.
If you
do not
wish to store the settings
in memory, touch the safety lock sensor
$
until the displays go out.
If you select the programming function
whilst a residual heat indicator is on,
the residual heat indicator will flash for
up to 45 minutes after you have finished
using the programming function.
However, you can continue to use the
appliance as usual during this time.
Programming
39
Summary of Contents for KM 530
Page 69: ...69 ...
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 3106 M Nr 06 069 910 04 en ...
