
All cooktops come set for connection to
either natural gas or LP gas. The
adjustment of the included regulator
corresponds with the gas type of the
cooktop. If the appliance is to be
connected to another type of gas than it
is set for, both the regulator and
burners must be converted.
,
WARNING
The conversion kit must be
installed by a qualified technician
in accordance with the
manufacturer’s instructions and
all applicable local and national
codes.If the information in these
instructions is not followed
exactly, a fire, explosion or
production of carbon monoxide
may result causing property
damage, personal injury or loss of
life.The qualified technician is
responsible for the proper
installation of this kit.The
installation is not proper and
complete until the operation of the
converted appliance is checked as
specified in the instructions
supplied with the conversion kit.
To convert the regulator:
^
Unscrew the hexagonal silver cap
located on the top of the regulator.
^
Make sure that the spring stays in
place.
^
Flip it over and screw it back in
place.
A stamp should be visible on top of the
cap or at the bottom of the center hole
when converted ("LP" for LPG and "NG"
for Natural gas).
Converting to another type of gas
33