
Safety feature
This appliance is equipped with an
ignition safety control. This control cuts
the gas supply if the flame goes out
and re-ignition is unsuccessful.
^
To re-ignite the burner, turn the
control knob to "
ß
", then follow the
procedure outlined in "Turning on and
off / Regulating".
This safety feature is not operated by
electricity, it will be active even if the
appliance is in use during a power
failure.
Using the cooktop during a
power failure
If there is an interruption to the
electrical supply, the gas can be
ignited using a match.
^
Press down and turn the desired
control knob counter-clockwise to the
largest flame symbol.
^
While holding down the knob, light
the gas at the burner with a match.
^
When the flame appears, keep the
control knob pressed in for about
8-10 seconds to allow for the ignition
safety control to reach operating
temperature.
Using the cooktop
14