Operation
27
Turning the appliance on
Press the knob lightly and turn it
counter-clockwise to the large flame
symbol.
Then press it down firmly to open the
gas supply and let it go.
The ignition electrode “clicks” and ig-
nites the gas.
When a knob is activated, a spark is
developed automatically on all burn-
ers. This is normal and does not indi-
cate a fault.
If the burner does not ignite, turn the
knob to the
position. Ventilate the
room or wait for at least 1 minute be-
fore trying again.
If the burner does not ignite the sec-
ond time, turn the knob back to the
position and see “Frequently asked
questions”.
Brief re-ignition may occur during
switch-on (1–2 x clicks), e.g., if there is
a draft.
Switching on during a power outage
In case of a power outage, the flame
can be ignited manually.
Press in the relevant control knob and
turn it counterclockwise to the large
flame symbol.
Hold the control knob pressed down
and light the gas at the burner with a
match.
Keep the control knob pressed down
for a further 5–10 seconds and then
release it.
