Miele KM 3034 Operating And Installation Instructions Download Page 11

Page: 11 / 64

Warning and Safety instructions

Correct use



The cooktop gets hot when in use and remains hot for a while

after being switched off. There is a danger of burning until the
residual heat indicators go out.



DO NOT USE THIS APPLIANCE AS A SPACE HEATER.



Oil and fat can overheat and catch fire. Do not leave the cooktop

unattended when cooking with oil and fat. If it does ignite, do not
attempt to put the flames out with water.
Switch off the cooktop and use a suitable fire blanket, saucepan lid,
damp towel or similar to smother the flames.



The cooking process has to be supervised. A short term cooking

process has to be supervised continuously.



Flames could set the grease filters of a rangehood on fire. Do not

flambé under a rangehood.



DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE

APPLIANCE STORAGE DRAWER OR NEAR THIS APPLIANCE.
CUTLERY INSERTS MUST BE HEAT-RESISTANT.



DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS

APPLIANCE WHILE IT IS IN OPERATION.



Do not heat an empty pan.



Do not heat up food in closed containers e.g. tins or sealed jars

on the cooktop, as pressure can build up in the containers, causing
them to explode.



Do not cover the cooktop, e.g. with a cooktop cover, a cloth or

protective foil. The material could catch fire, shatter or melt if the
cooktop is switched on by mistake or if residual heat is still present.

Summary of Contents for KM 3034

































































Search results

Summary of Contents for KM 3034

Reviews:

Related manuals for KM 3034

Brands by name

Popular brands

Miele KM 3034, Operating And Installation Instructions

Search results

Summary of Contents for KM 3034

Reviews:

Related manuals for KM 3034

Brands by name

Popular brands