Miele KM 2256 Operating And Installation Manual Download Page 60

Page: 60 / 64

To change the small jets

To change the small jets, the burner
securing screws must first be loosened
and the upper section of the appliance
removed.

Pull off the controls.

Then lift off the upper section.

Small, medium, large and extra large
burners

Using a small screwdriver, unscrew
small jet

in the gas fitting.

Pull out the jet with a pair of pliers.

Fit the correct jet securely (see jet
table).

Finally, secure the jets against
inadvertent loosening with sealing
wax.

Wok burner

Small diameter jet
(e.g. for liquid gas: 0.23)

Large diameter jet
(e.g. for liquid gas: 0.60)

Using a small screwdriver, unscrew
the two small jets

and

in the gas

fitting.

Pull out the jets with a pair of pliers.

Fit the correct jets securely (see jet
table).

Finally, secure the jets against
inadvertent loosening with sealing
wax.

Conversion to another type of gas

Summary of Contents for KM 2256

































































Search results

Summary of Contents for KM 2256

Reviews:

Brands by name

Popular brands

Miele KM 2256, Operating And Installation Manual

Search results

Summary of Contents for KM 2256

Reviews:

Brands by name

Popular brands