![Miele KM 2256 Operating And Installation Manual Download Page 38](http://html.mh-extra.com/html/miele/km-2256/km-2256_operating-and-installation-manual_234230038.webp)
Installation
^
Make the worktop cut-out according
to the dimensions given in the
building-in dimension diagram.
Remember to maintain the
minimum
safety distances
(see "Safety
instructions for installation").
^
Seal the cut surfaces on
wood/laminated worktops with a
suitable heat-resistant sealant to
avoid swelling caused by moisture.
Make sure that the sealant does not
come into contact with the top of the
worktop.
^
Feed the connection cable down
through the cut-out.
^
Place the hob in the cut-out without
securing it.
If the corners of the frame are not
flush with the worktop surface, the
corner radius (
ß
R4) can be carefully
scribed to fit.
^
Connect the hob to the mains (see
"Electrical connection").
^
Connect the appliance to the gas
supply (see "Gas connection").
^
Secure the appliance at the back and
front using the fixings supplied. See
"Securing the appliance".
KM 2256
38
Summary of Contents for KM 2256
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 4311 M Nr 07 072 451 05 ...