Selecting further settings
53
Changing the volume of the alarms
and buzzers
/
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
Tap
.
Swipe left or right until
is shown in
the middle.
Tap
.
Select the desired volume by swiping
the segment bar to the left or right.
Confirm the volume you want by
tapping on the segment bar.
When the alarms and buzzers are
switched off,
will appear.
Adjusting the display brightness
You can adjust the display brightness to
the lighting conditions in the room.
Tap
.
Swipe left or right until
is shown in
the middle.
Tap
.
Select the desired brightness level by
swiping left or right on the segment
bar.
Confirm the brightness you want by
tapping on the segment bar.
Switching off Demo mode
Demo mode
allows the refrigeration
appliance to be presented in the
showroom without the cooling system
being switched on. Do not activate this
setting for domestic use.
If Demo mode has been switched on
as a default setting,
will appear in
the start display.
Tap
.
Tap
.
Swipe left or right until
is shown in
the middle.
Tap
.
After Demo mode
has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their factory
default settings
All settings made on the refrigeration
appliance will be reset to the factory
default settings (for settings, see “Guide
to the appliance”).
Tap
.
Swipe left or right until
is shown in
the middle.
Tap
.
will appear in the display.
Touch
OK
.
The refrigeration appliance shuts down
and must be switched on again.
