Miele KFNS 37692 iDE Operating And Installation Instructions Download Page 14

Page: 14 / 112

Normal
energy consumption

Increased
energy consumption

Installation /
Maintenance

In a well-ventilated room.

In an enclosed,
poorly ventilated room.

Protected from direct
sunlight.

In direct sunlight.

Away from heat sources
(radiator, range/oven).

Near a heat source (radiator,
range/oven).

Where the room temperature
is ideal, i.e. around 68°F
(20°C).

Where the room temperature
is higher.

Do not block the ventilation
openings, and keep them
free of dust.

Where the ventilation
openings are blocked and
full of dust.

Temperature
setting

39 to 41°F (4 to 5°C) in the
refrigerator section

With a low temperature
setting: the colder the
temperature in the
refrigerator and freezer
zones, the higher the energy
consumption!

PerfectFresh Pro zone just
above 32°F (0°C)

0°F (-18°C) in the freezer
section

How to save energy

Summary of Contents for KFNS 37692 iDE

















































































































Search results

Summary of Contents for KFNS 37692 iDE

Reviews:

Related manuals for KFNS 37692 iDE

Brands by name

Popular brands

Miele KFNS 37692 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFNS 37692 iDE

Reviews:

Related manuals for KFNS 37692 iDE

Brands by name

Popular brands