^
Open both appliance doors.
^
Secure plastic bracket
g
to the side
opposite the hinges using screws
h
(M5 x 22)
^
Attach fixing bracket
i
loosely to the
appliance using screws
j
(M5 x 15).
^
If necessary shorten sealing strip
k
to the height of the niche and then
remove the protective foil.
^
Apply sealing strip
k
to the side of
the appliance on which the doors are
opened so that it is flush with the
front edge of the appliance.
Sealing strip
k
should meet up with
the lower edge of fixing bracket
i
.
Building in the appliance
^
Depending on the thickness of the
appliance housing walls, now push
the appliance into the niche until
– the spacers touch the housing unit
wall
a
(16 mm thick walls),
– or the front edges of the hinges are
flush with the side walls of the
housing unit
b
(19 mm thick walls).
^
Align the appliance height on both
sides by altering the adjustable feet
using the spanner supplied
c
.
^
Make sure that plastic bracket
d
is
flush with the front edge of the
housing unit.
This will create a gap all round of
42
mm
to the front edges of the housing
unit side walls.
Building in the appliance
55
Downloaded from Fridge-Manual.com Manuals
