background image

Selecting further settings

41

Switching Sabbath mode 

 on/off

The refrigeration appliance has a
Sabbath mode to support the
observance of religious customs.

The following functions are deactivated
with Sabbath mode:

– interior lighting when the door is

opened

– all acoustic and visual signals

– temperature display

– SuperCool, SuperFreeze, Party mode

or Holiday mode functions (if
previously switched on)

– minute minder (if previously switched

on)

In addition, you cannot make any
settings in Settings mode 

.

The Sabbath mode function will switch
itself off automatically after approx.
120 hours.

Ensure that the doors are properly
closed, as visual and audible alarms
are switched off.

Health risk caused by

decomposing food.
As any mains outage during Sabbath
mode is not indicated, the frozen
goods may thaw or defrost. This will
reduce the shelf life of the food.
Check whether the frozen goods
have started to defrost. If they have,
check that the food is safe to use
and if it is, then use it as soon as
possible or cook it before freezing it
again.

– Switching Sabbath mode on

Touch 

.

 lights up orange.

Then 

 lights up white in the display.

Sabbath mode display

 will go out after approx. 3 seconds

and the display will go dark.

– Switching Sabbath mode off
prematurely

Touch the display.

 appears.

Touch 

.

 lights up orange.

Touch 

.

 lights up white. The function is

switched off.

Summary of Contents for KFN 29683 D brws





















































































































Reviews: