Miele KFN 14827 SDE cs Page 75 Operating And Installation Manual Download

Page: 75 / 80

First screw the soft-close mechanism
onto the appliance side, then onto
the handle side

, pushing it firmly

towards the appliance.

Attach panel

to soft-close

mechanism bracket

Push cover

on from the side so

that the openings for the pin

are

vertically aligned.

Align bracket

to the hinge plate,

and insert pin

from above so that

the right angle fits into the recess.

Clip cover

into position.

Make sure that cover

fits properly so

that the door can be closed without
hindrance and the pin is protected.

Remove retaining clip

Replace panel

onto the soft-close

mechanism from above, clicking it
back into place first at the bottom
and then at the top.

Close the upper door.

Changing the door hinging

Summary of Contents for KFN 14827 SDE cs

















































































Search results

Summary of Contents for KFN 14827 SDE cs

Reviews:

Related manuals for KFN 14827 SDE cs

Brands by name

Popular brands

Miele KFN 14827 SDE cs, Operating And Installation Manual

Search results

Summary of Contents for KFN 14827 SDE cs

Reviews:

Related manuals for KFN 14827 SDE cs

Brands by name

Popular brands