Miele KF 9757 iD Page 60 Operating And Installation Instructions Download

Page: 60 / 64

The door hinges are set ex-works to
enable the doors to be opened wide.

However, if the opening angle of the
doors needs to be limited for any
reason, the hinges can be adjusted to
accommodate this.

– For example, if the appliance doors

hit an adjacent wall when opened,
the opening angle can be limited to
90°.

Place the locking pins supplied for
limiting the door opening into the
hinges from above.

The door opening angle is now limited
to 90°.

– If you would like the appliance doors

to be cushioned so that they open
more softly, the spring tension on the
doors can be adjusted.

To do this, use the allen key supplied to
adjust the door hinges.

To reduce the opening angle:

Turn the allen key clockwise.

This tightens the hinges and makes it
harder to open the door wide.

To open the door
fully:

Turn the allen key anticlockwise.

Adjusting the door hinges

Summary of Contents for KF 9757 iD

































































Search results

Summary of Contents for KF 9757 iD

Reviews:

Related manuals for KF 9757 iD

Brands by name

Popular brands

Miele KF 9757 iD, Operating And Installation Instructions

Search results

Summary of Contents for KF 9757 iD

Reviews:

Related manuals for KF 9757 iD

Brands by name

Popular brands