Miele KF 9757 iD, Operating And Installation Instructions, Page: 56 / 64

^
Then align the appliance front to the
front edges of the side walls of the
housing unit.
^
Secure plastic bracket
d
to the side
opposite the hinges using the M5 x
22 screws
e
.
^
Push the appliance in until the plastic
bracket is flush with the front edge of
the housing unit floor
f
.
Securing the appliance
^
To fix the appliance to the housing
unit at the top and bottom:
– screw the long 4 x 19 mm chip board
screws
a
into all of the hinge plates,
– open the plastic bracket, and screw a
long chipboard screw
b
(4 x 19 mm)
through the middle of the long hole in
the plastic bracket.
^
Close the plastic bracket.
^
Close the appliance doors.
Fitting the furniture doors
^
A gap of 8 mm
a
must be set
between the appliance door and the
fixing bracket.
^
Push fitting aids
d
up to the height of
the furniture door: the lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see
-
on
the diagram).
^
Undo nuts
b
, and take fixing bracket
c
off together with the fitting aids.
Building in the appliance
56