Temperature selection
The temperatures for the refrigerator
and for the freezer section are set
independently from one another using
the buttons to the right and left hand
sides of the temperature displays.
Press the
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the
temperature (it gets colder)
The temperature being set will flash in
the display.
When pressing the buttons the
following are shown in the display:
– When first pressed the
last
temperature selected
flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current
actual
temperature of the refrigerator or
freezer is automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full
and
for
approx. 24 hours if the appliance is
full
before checking the temperature
display as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is still too
high or too low, you will need to adjust it
again.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 2 °C
to 11 °C
– in the freezer section from -14 °C to
-28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Temperature displays
During normal operation, the
temperature displays show the
temperature in the middle of the
refrigerator section and the temperature
in the warmest part of the freezer
section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator
section, and if the temperature in the
freezer section is above 0 °C), bars will
flash in the temperature displays.
It will take approximately 3 to 8 hours
for the appliance to reach the required
temperature. The time it takes will
depend on where the appliance is
located and the temperature setting
selected.
The correct temperature
15
Summary of Contents for KF 7654 SNE ed
Page 47: ...47 ...