The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow the instructions below.
^
Open the lower appliance door.
^
Use a screwdriver to lever the plinth
fascia
a
out, then pull it forwards
and off.
^
Use a screwdriver to remove cover
b
, then close the door.
^
Remove screw
c
completely.
^
Pull door support
d
together with
hinge pin
e
downwards, then tilt it
forwards and take it off.
^
Open the lower appliance door, move
it downwards and take it off.
^
With the upper door
g
closed, pull
hinge pin
f
downwards to remove it.
^
Open the upper door, and pull it
downwards and off.
Re-fit all parts on the opposite side
^
Remove the cover plate
a
.
^
Unscrew bearing block
b
and place
it on the other side (see illustration).
^
Unscrew upper hinge pin
c
using
the spanner supplied and refit on the
oppositie side.
^
Place cover plate
a
on the other
side.
^
Exchange cover
i
in the middle of
the appliance with hinge bracket
e
.
To do this:
Undo screws
h
, pull cover
i
and
hinge bracket
e
off to the side, turn
around and refit into position on the
opposite side.
Changing the door hinging
38
