background image

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.

Make sure that water cannot get into
the electronic unit or into the light.

Do not let water get into the
drainage channel and drain hole
when cleaning.

Never use steam cleaning

apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.

The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.

Before cleaning

^

Switch the appliance off by turning
the temperature selector to "0" and
then switching off at the socket and
removing the plug.

^

Take any food out of the appliance
and store it in a cool place.

^

Take out any removable parts, e.g.
shelves, for cleaning.

Cleaning the interior and
accessories

^

Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted. Use warm
water will a little washing up liquid.

^

Accessories and shelves should all
be hand-washed. The butter dish is,
however, dishwasher safe.

^

Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.

^

After cleaning wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.

^

A microfibre E-Cloth is available from
the Miele UK Spare Parts Department
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

Ventilation gaps

^

The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliance’s
energy consumption.

Cleaning and care

26

Summary of Contents for KD 683 i-3













































Reviews: