Before using for the first time
^
Remove the transit fittings from the
appliance, and dispose of them.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Press the On/Off button.
The appliance will start to cool and one
of the refrigeration zone temperature
lights will come on. The refrigerator
interior light will come on if the door is
opened.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off
^
Press the On/Off button.
All the indicator lights in the display will
go out. The cooling system and the
interior light are now switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^
switch the appliance off,
^
switch off at the wall socket and
withdraw the plug,
^
defrost the freezer section,
^
clean the appliance out and
^
leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
13
Summary of Contents for KD 1450 S
Page 37: ...37 ...
Page 38: ...38 ...
Page 39: ...39 ...
Page 40: ...Alteration rights reserved 3405 KD 1450 S KD 1450 SD M Nr 06 589 130 02 en GB ...
