^
Hang the furniture door onto adjust-
ing bolts
a
.
^
Loosely attach the nuts
b
on the
adjusting bolts.
^
Shut the door and check the distance
between the door and neighbouring
furniture doors.
^
Align to match neighbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" are made by turning
the adjusting bolts
a
with a screw-
driver.
^
Tighten the nuts
b
slightly.
^
Use fixing bracket
a
to attach the
appliance door to the furniture door.
– Using a screwdriver remove
cover
b
.
– Check that the two metal edges
c
are flush (see symbol
II
).
– Drill fixing holes
d
and screw in the
short 4 x 14 mm chip board
screws
e
.
– Align depth Z on the furniture door:
Loosen the cross-slotted screws
f
at the top of the door, and loosen the
hexagon headed screw
g
on the fix-
ing bracket at the bottom of the door.
By moving the furniture door create a
gap of 2 mm between the furniture
door and front edge of the niche.
Close the door and align it with
neighbouring furniture doors.
(On large or divided doors attach a
second pair of fixing brackets
a
in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
Building in the appliance
31
