Building in
^
Push the appliance into the niche.
Make sure that the mains cable does
not get trapped.
^
Depending on the thickness of the
appliance housing walls, push the
appliance into the niche until
– the spacer piece touches the hous-
ing unit wall
a
(16 mm thick walls),
– or the front edges of the hinges are
flush with the side walls of the hous-
ing unit
b
(19 mm thick walls).
The cover strip must
not
protrude in
front of the edge of the housing unit.
It must disappear completely into
the niche.
^
Push the hinged side of the appli-
ance to the furniture wall.
^
The appliance height can be cor-
rected by altering the adjustable feet
using the spanner supplied
f
.
^
Secure plastic bracket
c
to the side
opposite the hinges using the
M5 x 22 countersunk screws
d
.
^
Push the appliance in until the plastic
bracket is flush with the front edge of
the housing unit floor
e
.
^
To fix the appliance to the housing
unit at the top and bottom screw the
long 4 x 19 mm chip board screws
a
loosely into the hinge.
^
Screw a long 4 x 19 mm chip board
screw
b
loosely into the middle of
the long slot on the plastic bracket
and then turn the plastic bracket
c
downwards.
Building in the appliance
29
