![background image](http://html.mh-extra.com/html/miele/k-821-i/k-821-i_operating-and-installation-manual_236467039.webp)
Securing the appliance
Whilst counterholding the adjusting
bolts
c
with a screwdriver, tighten
nuts
b
at the top of the appliance
door.
Tighten all screws.
Securely screw the appliance to the
housing unit at the top and bottom:
Flap the plastic bracket up and
screw a second screw
b
through
the plastic bracket. Tighten both
screws and flap the plastic bracket
back down.
Align the cover strip
c
by sliding it
parallel to the top of the housing unit.
The cover strip must not protrude.
Secure the cover strip to the top of
the housing unit using the short
4 x 14 mm chip board screws
d
.
Place all covers in position.
Building in the appliance
39