![background image](http://html.mh-extra.com/html/miele/k-821-i/k-821-i_operating-and-installation-manual_236467037.webp)
Fitting the furniture door
A gap of 8 mm must be set between
the appliance door and the fixing
bracket.
Push fitting aids
b
up to the height
of the furniture door: The lower edge
"X" of the fitting aids must be at the
same height as the upper edge of
the furniture door being fitted, see
-
on the diagram.
Undo nuts
c
, and take fixing
bracket
d
off together with the fitting
aids.
Using a pencil mark a line down the
centre of the inside of the furniture
door.
Using fitting aids
b
hang the fixing
bracket on the
inside side
of the fur-
niture door. Align the fixing bracket
centrally.
Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws
c
. (On cassette doors
only use 4 screws on the edges).
Pull the fitting aids upwards to
remove them
d
.
Turn them round and insert them
right into the middle slot on fixing
bracket
e
.
Building in the appliance
37