Miele K 2601 V Operating And Installation Instructions Download Page 98

Page: 98 / 108

Problem solving guide

Issue

Cause and remedy

An alarm sounds.

The appliance door has been open for longer than
2 minutes.



Close the appliance door.

No alarm sounds
despite the appliance
door being open.

You have switched off the buzzer.



Switch the buzzer back on using Settings
mode



The

Sabbath mode



function is switched on: the

temperature display is dark and the



symbol is

shown in the display.



You can switch off Sabbath mode at any time (see
“Selecting additional settings – Switching

Sabbath

mode



on or off”).

The appliance door
cannot be opened.

The

Pull2open

door assistant is switched on but the

refrigeration appliance has a handle-free furniture
front.



For handle-free furniture fronts, switch on the

Push2open

door assistant (see “Selecting

additional settings – Switching on the

Door

assistant



”).

The appliance door
cannot be opened when

Sabbath mode



switched on.

The

Push2open

door assistant is switched on at the

same time as

Sabbath mode



When

Sabbath mode

is switched on, the door

assistant is deactivated.



Pull the appliance door open from below or from
the side.

Summary of Contents for K 2601 V













































































































Search results

Summary of Contents for K 2601 V

Reviews:

Related manuals for K 2601 V

Brands by name

Popular brands

Miele K 2601 V, Operating And Installation Instructions

Search results

Summary of Contents for K 2601 V

Reviews:

Related manuals for K 2601 V

Brands by name

Popular brands