Note:
– Do not twist or jam the appliance
inside the niche. When unscrewing
the height-adjustable feet, proceed
gradually, alternating between left
and right.
– The adjustment of the rear feet is
aided if the appliance is lifted at the
rear (tipped forward slightly).
– If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
– Do not use a power tool to adjust the
rear feet!
Attaching the appliance to the
installation niche
^
Screw the attachment plate lugs
h
to
the overhead furniture/fixtures.
If there is no way to attach the top of
the appliance, it can be attached to the
sides of the installation niche.
^
Pull out the plate side lugs
i
.
^
Secure the attachment plate side lugs.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
^
If necessary, shorten the filler strip
j
to the required height.
^
Place the 2 strips on top of each
other
k
.
^
Insert the filler strip until you hear it
click into place
l
.
Installing the appliance
50
Summary of Contents for Independence F1801Vi
Page 40: ...Niche dimensions Niche width A K 18X1 Vi 30 762 mm K 19X1 Vi 36 915 mm Dimensions 40 ...
Page 62: ...62 ...
Page 63: ...63 ...
