Using the settings
When a sensor button has been
selected with a finger touch, it will
appear yellow.
A de-selected button will appear white.
^
Touch the access button "
p
" so it
turns yellow.
On the control panel you will now see
the sensor buttons for the three
appliance zones.
^
To change settings (e.g., to set the
temperature, etc.), touch the sensor
button for the appliance zone you
wish to set.
The selected sensor button appears
yellow and depending on the zone
selected, additional sensor buttons will
appear on the control panel.
Depending on the zone selected, you
can now:
– adjust the temperature,
– select the SuperCool function or
– select settings for the SmartFresh
drawers by food type.
For additional information, see the
corresponding sections in the manual.
^
To de-select a zone touch the sensor
button for that particular zone so that
it turns white or select another sensor
button.
^
To leave the settings menu, touch the
access button "
p
" so it turns white.
The last settings entered are stored.
If the access button is not pressed
the display will go out after approx.
30 secs.
The sensor buttons for the three
appliance zones now disappear from
the control panel.
Settings
10
Summary of Contents for Independence F1801Vi
Page 40: ...Niche dimensions Niche width A K 18X1 Vi 30 762 mm K 19X1 Vi 36 915 mm Dimensions 40 ...
Page 62: ...62 ...
Page 63: ...63 ...