Miele HS15, Operating Instructions Manual

Page: 49 / 152

en
49
Footswitch with Boost function
(Fig. 26 + 27)
Some models also feature a Boost
power function. This function uses in-
creased power for a short period for va-
cuuming both fine and coarse stubborn
soiling.
 Press the + footswitch until the max-
imum power level has been reached.
 Then press the + footswitch again.
This activates the Boost function for 20
seconds. The Boost indicator will light
up yellow.
You now have the following options:

Press the - footswitch before the 20
seconds have elapsed.
This switches the Boost function off
and activates maximum power.

Press the + footswitch again once the
20 seconds have elapsed.
This activates the Boost function a
second time for 20 seconds. It can be
activated three times in a row. After
that, a pause of one minute is required
before reactivating it.
Using the Boost power level changes
the actual power consumption (see
“Notes on the European Regulation
(EU) No. 666/2013”).
Radio-control handle (Fig. 28)
When the vacuum cleaner is switched
on with the On/Off foot control

, the
Standby indicator

on the vacuum
cleaner will light up yellow.

Press the Standby button

on the
handle.
The Standby indicator  on the va-
cuum cleaner will go out.
The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
 Press the + button to select a higher
suction power level.

Press the - button to select a lower
suction power level.
Radio-control handle with Boost
function
Some models also feature a Boost
power function. This function uses in-
creased power for a short period for va-
cuuming both fine and coarse stubborn
soiling.

Press the + control until the maximum
power level has been reached.

Then press the + control again.
This activates the Boost function for 20
seconds. The Boost indicator on the va-
cuum cleaner will light up yellow
You now have the following options:

Press the - control before the 20
seconds have elapsed
This switches the Boost function off
and activates maximum power.
 Press the + control again once the 20
seconds have elapsed