Cleaning and care
135
The buzzer will stop and the visual
indicators will go out after you touch the
“Timer” sensor.
Delaying the start of the Self Clean
program
To delay the start of the Self Clean
program, select
Start Later
.
Set the desired time for starting the
Self Clean program.
Confirm by touching OK.
The door will lock automatically.
Start at
and the set start time appear in the
display.
Up until the start time you can alter the
start and end time with
Change
.
As soon as the start time has been
reached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
At the end of the Self Clean program
When the duration remaining reaches
0:00 h, a message will appear in the
display to tell you that the door is
unlocking.
When the door lock has been
deactivated:
–
Program Finished
appears.
– The buzzer will sound if it has been
turned on (see “Settings – Volume –
Buzzer tones”).
Turn the oven off.
The buzzer will stop and the symbols in
the display will go out.
Danger of burning!
Wait until the oven has cooled down
before removing any residual soiling
left in the oven compartment after
the Self Clean program.
Wipe any residues (e.g., ash) left
behind after the Self Clean program
out of the oven compartment and off
of any accessories. The amount of
ash will vary depending on how dirty
the oven was.
Most soiling can be easily removed
using a clean, soft sponge and a mild
solution of warm water and liquid dish
soap.
Depending on how dirty the oven was
prior to cleaning, there may be a
visible layer of soiling across the inner
glass pane on the door. This should
be removed using the scouring side of
a dish sponge, a glass scraper, or with
a stainless steel scrubbing pad and
liquid dish soap.
Summary of Contents for HR 1622-2
Page 150: ......
