Miele H6560B Page 83 Operating And Installation Instructions Download

Page: 83 / 104

Cleaning and care

Stubborn soiling on the

FlexiClip runners

Do not wash the FlexiClip telescopic

runners in the dishwasher. This will

remove the special lubricant which is

essential for their smooth

functioning.

For stubborn surface soiling or if the

bearings become sticky proceed as

follows:



Soak the FlexiClip runners for approx.

10 minutes in warm water and liquid

dish soap.

If necessary, use the rough side of a

dish sponge. The bearing can be

cleaned using a soft brush.

After cleaning discolorations or lighter

areas may remain on the runners. This

will not affect the performance in any

way.

Cleaning the catalytic

enameled back panel

Soiling from oil and fat is burnt off

catalytic enamel when very high

temperatures are used in the oven.
The higher the temperature, the more

effective the process.

Exposure to scouring agents,

abrasive brushes or sponges and

oven sprays can cause the catalytic

enamel to lose its self-cleaning

properties.

Catalytic enameled panels should be

removed before using oven spray.

Removing soiling caused by spices,

sugar and similar deposits.



Remove the back panel (see

"Cleaning and care - Removing the

back panel").



Wash the back panel by hand with

warm water and liquid dish soap

applied with a soft sponge.



Rinse thoroughly and let dry before

placing it back in the oven.

Summary of Contents for H6560B









































































































Search results

Summary of Contents for H6560B

Reviews:

Related manuals for H6560B

Brands by name

Popular brands

Miele H6560B, Operating And Installation Instructions

Search results

Summary of Contents for H6560B

Reviews:

Related manuals for H6560B

Brands by name

Popular brands