Miele H6560B Page 95 Operating And Installation Instructions Download

Page: 95 / 104

Electrical connection



CAUTION:

Before servicing, disconnect the

power supply by either removing the

fuse, shutting off the power main or

manually "tripping" the circuit

breaker.

Installation, repair and maintenance

work must be performed by a Miele

authorized service technician. Work

by unqualified persons could be

dangerous and may void the

warranty.

Before connecting the appliance to

the power supply, make sure that the

voltage and frequency listed on the

data plate correspond with the

household electrical supply. This

data must correspond to prevent

machine damage. Consult an

electrician if in doubt.

Only operate the appliance after it

has been installed into cabinetry.

The plug must be plugged into an

appropriate outlet that is installed

and grounded in accordance with all

local codes and ordinances.

WARNING: THIS APPLIANCE MUST

BE GROUNDED
Installer: Please leave these

instructions with the consumer.

Electrical connection

The oven is equipped with a power

cord approx. 7' 2" (2.2 m) in length with

a NEMA 14-30 P plug ready for

connection to the power supply:

– 120/208 V, 20 A, 60 Hz

– 120/240 V, 20 A, 60 Hz

The voltage can be adjusted (see

"Settings - Electrical Version").

SAVE THESE INSTRUCTIONS FOR

THE ELECTRICAL INSPECTOR'S

USE.

Summary of Contents for H6560B









































































































Search results

Summary of Contents for H6560B

Reviews:

Related manuals for H6560B

Brands by name

Popular brands

Miele H6560B, Operating And Installation Instructions

Search results

Summary of Contents for H6560B

Reviews:

Related manuals for H6560B

Brands by name

Popular brands