Miele H6461B Page 22 Operating And Installation Instructions Download

Page: 22 / 128

Other sensors

Sensor Function

Notes

Y X

For scrolling
through the lists
of options

The arrow sensors are used for scrolling up or down
through the lists of options. The options are
highlighted one after the other as you scroll through
the list.

The option you want must be highlighted before you
can select it.

For changing
values

Values which are highlighted can be increased or
decreased using the arrow sensors.

For calling up
functions and
saving settings

Functions highlighted in the display can be called up
by touching OK. The selected function can then be
changed.

Touch OK to save the changes.

If information appears in the display select OK to
confirm the message.

To go back a step

To call up settings Pressing the

sensor when the oven is switched

on will bring up a list of settings.

If the display is switched off, the

sensor will not

react until the oven is switched on.

During a cooking process you can alter the
temperature or set a cooking duration after touching
this sensor.

Oven controls

Summary of Contents for H6461B

































































































































Search results

Summary of Contents for H6461B

Reviews:

Related manuals for H6461B

Brands by name

Popular brands

Miele H6461B, Operating And Installation Instructions

Search results

Summary of Contents for H6461B

Reviews:

Related manuals for H6461B

Brands by name

Popular brands