Miele H6461B Page 49 Operating And Installation Instructions Download

Page: 49 / 128

Moisture plus

(Ring heat element* + fan* + steam
injection system)

For baking and roasting with moisture
injection.

* Equates to Fan plus.

The steam injection system can also
be used with other heating systems
(see "Moisture plus").

Fan grill

(Top heat/grill e fan)

For grilling thicker cuts of meat
(e. g. roulades, chicken). Lower
temperatures can be used than when
using the Grill

function, as the fan

distributes the heat to the food straight
away.

Automatic programmes

(depending on programme)

This option will bring up a list of all
Automatic programmes available on
this oven.

The following are selected via
Further programmes

Bottom heat

(Bottom heat element)

Use this setting towards the end of
cooking to brown the base of a cake,
quiche or pizza.

Defrost

(Ring heat e fan)

For the gentle defrosting of frozen food.

Gentle bake

(Ring heat e fan)

For cooking meat.

Overview of functions

Summary of Contents for H6461B

































































































































Search results

Summary of Contents for H6461B

Reviews:

Related manuals for H6461B

Brands by name

Popular brands

Miele H6461B, Operating And Installation Instructions

Search results

Summary of Contents for H6461B

Reviews:

Related manuals for H6461B

Brands by name

Popular brands