![Miele H6100BM Operating And Installation Instructions Download Page 100](http://html.mh-extra.com/html/miele/h6100bm/h6100bm_operating-and-installation-instructions_235897100.webp)
Problem solving guide
100
Problem
Cause and remedy
A function has been
selected and the time of
day and the
symbol
are still in the display.
The system lock
has been activated.
Switch off the system lock (see "System lock
").
The oven does not heat
up.
Demo mode has been activated.
appears in the
display.The oven can be operated but does not heat
up.
Deactivate demo mode (see "Settings –
").
A function has been
selected but the oven is
not working.
There has been a power cut which has caused a
current process to stop.
Turn the function selector to the
•
position and
switch the oven off. Start the cooking process
again.
has appeared in
the display with the
triangle
flashing
under
.
The power supply was interrupted for longer than 200
hours.
Reset the time of day (see "Using for the first
time").
has appeared
unexpectedly in the
display and
is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
Turn the function selector to
•
and switch the oven
off. The oven is now ready to use again
immediately.
appears in the
display,
There is a problem that you cannot resolve.
Call the Miele Service Department.
If the door is opened
whilst using Microwave
solo
, the oven stops
making a noise.
This is not a fault. If the door is opened while
Microwave solo
is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
A noise can be heard
after a cooking
process.
The cooling fan is switched on.
It will switch off automatically after a while.
Summary of Contents for H6100BM
Page 110: ......