Miele H 809 B2 Technical Information Download Page 9

Page: 9 / 47

Technical Information

H806 Series – Mechanical Oven

1.1.6

Oven

Interior

1.1.6.1 Top

Cavity

Enameled, Volume 48 l.5

Rear panel, side liners and roof are catalytically enameled and

replaceable.

Combi system with 9 functions.

Temperature-regulated infra-red grill.

Temperature controlled cooking with Roast Probe between 30°C and

99°C.

1.1.6.2

Bottom Cavity

Enameled, Volume 48 l.

Rear panel, side liners and roof are catalytically enameled and

replaceable.

Convention heating with roof and floor elements and 4 functions.

1.1.7

Oven

Door

Removable

1.1.8

Heating

1.1.8.1

Roof and Floor Heating (Top and Bottom Cavity)

Visible roof heater element: 1250 W

Full rating achieved by switching in series with the infra-red heating

element.

Concealed floor heater element: 1300W

1.1.8.2

Fan Heating (Top Cavity)

Circular heater element: 2500 W

1.1.8.3

Grilling (Top and Bottom Cavity)

Hinged infra-red heater element: 2150 W

Summary of Contents for H 809 B2
















































Search results

Summary of Contents for H 809 B2

Reviews:

Miele H 809 B2, Technical Information, Page: 9 / 47

Search results

Summary of Contents for H 809 B2

Reviews: