Plumbing
132
Notes on connecting to the
water supply
The appliance may only be
connected to the water supply by a
qualified professional.
Disconnect the appliance from the
power supply before connecting it to
the water line.
Turn off the water supply before
connecting the water intake lines for
the oven.
– All devices used for connecting the
appliance to the water supply must
comply with the current national and
local safety regulations in the country
in which the appliance is being
installed.
–
Connect the oven to a cold water
supply only.
– The oven can be connected to a tap
water line without a check valve.
– A shut-off valve must be provided
between the stainless steel hose and
the building's water supply to ensure
that the water supply can be cut off if
necessary.
– Make sure that the water shut-off
valve is still accessible after the
appliance has been installed.
– The water pressure must be between
14.5 and 145 psi (1 and 10 bar) If the
pressure is higher than this, install a
pressure reducing valve.
– The stainless steel hose provided has
a length of 4' 11" (1.5 m). Longer inlet
hoses are available if necessary. Do
not shorten the hoses.
– The total hose length must not
exceed 24.5 ft (7.5 m).
Make sure that the water shut-off
valve is still accessible after the
appliance has been installed.
Replace the stainless steel hose if it
is damaged, using only an original
Miele hose to do so (available from
Miele). The hose must be suitable for
supplying drinking water.
