Miele H 6100 BM, Operating And Installation Instructions

Page: 83 / 104

Cleaning and care
83
ɘ
Danger of burns!
Make sure the heating elements are
turned off and allowed to cool
completely.
ɘ
Danger of injury! The steam from
a steam cleaner could reach
electrical components and cause a
short circuit.
Do not use a steam cleaner to clean
this appliance.
All surfaces can discolor or be
damaged if unsuitable cleaning
agents are used. The front of the
oven, in particular, will be damaged
by oven cleaners and descalers.
All surfaces are susceptible to
scratches. Scratches on glass
surfaces could cause a breakage.
Remove any cleaning agent residues
immediately.
Stubborn soiling may damage the
oven.
Once the oven has cooled clean the
oven, the inside of the door and the
door seal. Waiting too long to clean
the oven will make if much more
difficult to clean.
Check the door and door seal for
any sign of damage. If any damage
is seen, the oven should not be used
again. Contact Miele.
Unsuitable cleaning agents
To better maintain your appliance avoid
the following:
– cleaners containing soda, ammonia,
thinners, or chlorides,
– cleaners containing descaling agents
or lime removers,
– abrasive cleaning agents e.g. powder
or cream cleansers, pumice stones,
– solvent-based cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– glass cleaning agents,
– ceramic cooktop cleaner,
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
– eraser sponges,
– metal scrapers,
– steel wool or scouring pads,
– stainless steel spiral pads,
– spot cleaners,
– oven cleaners*.
* These can, however, be used to
remove very heavy soiling from
PerfectClean treated surfaces.
Soiling not removed immediately can
become difficult to remove.
Continued use without cleaning will
make the oven much harder to clean.
Remove any soiling immediately.