FlexiClip telescopic runners
(optional accessory)
Up to three pairs of FlexiClip telescopic
runners can be installed in the oven.
The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.
Push the telescopic runners right in
before placing a tray or rack on
them.
To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.
The maximum load for the runners is
15 kg.
Fitting the FlexiClip telescopic
runners
,
Make sure that the oven has
cooled down before handling the
FlexiClip runners. Danger of burning!
The telescopic runners are fitted in
between the two rails that make up a
shelf level.
The telescopic runner with the Miele
logo is fitted on the right.
When fitting the telescopic runners,
do not
extend them.
^
Fit the telescopic runner in between
the two rails at the front (1) and then
push it into the oven compartment (2).
^
Then secure the telescopic runner to the
bottom of the two rails as illustrated (3).
If the telescopic runners are difficult
to pull out after fitting, you may need
to pull firmly on them once to release
them.
Accessories
16
Summary of Contents for H 5900 B
Page 2: ...2 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 22 1811 H 5900 B M Nr 09 111 790 02 ...