Microwave function
_
The following power levels can be
selected:
80 W, 150 W, 300 W, 450 W, 600 W,
850 W and 1000 W.
^
Turn the function selector to
Microwave
_
.
The display will show a suggested
power level of 1000 W.
I000
W
W
V
^
Whilst triangle
V
is flashing, use the
V
sensor to select a lower setting if
you wish.
After a short while or after touching the
OK sensor to confirm the entry the
following will appear in the display:
0:00
min
T
V
^
Whilst triangle
V
is flashing, use the
temperature selector or the
W
sensor
to enter the required duration in
minutes:seconds
(e.g. 1 minute 30 seconds).
After a short while or after touching the
OK sensor to confirm the entry the
following will appear in the display:
I:30
min
W
m
T
Start
V
^
Touch the OK sensor to start the
programme.
If no other symbol is selected, the
duration will be visible counting down in
the display.
At the end of the duration
– the
T
symbol will flash.
– the cooling fan will continue to run for
a while.
– a buzzer will sound, if the buzzer is
switched on, see "Settings
%
–
P 2
".
Touch any sensor to cancel the
buzzer.
The time of day will then appear in the
display. The lighting will switch off.
35
Operation
