Pyrolytic cleaning of the oven
interior
Before starting a pyrolytic cleaning
process, please note the following:
Remove any coarse soiling from the
oven before you start.
There is a fibre-glass door seal
around the oven cavity.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing can
damage it.
Remove all accessories as well as
the runners and any extra
accessories from the oven interior
before starting the pyrolytic cleaning
process. The high temperature
needed for pyrolysis will damage the
accessories.
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst the pyrolytic programme
is running. Danger of burning!
The appliance will heat up to over
400 °C during this cleaning process.
Any residual soiling is broken down and
reduced to ash by the high
temperatures.
The door locks automatically a short
time after the pyrolytic cleaning
process is started.
You can select the pyrolytic programme
duration depending on the level of
soiling:
–
PY I
(Duration approx. 2 h)
–
PY 2
(Duration approx. 2 h 30
min.)
For safety reasons, the door will remain
locked until the temperature in the oven
has fallen below 280 °C.
Starting a pyrolytic process
^
Take all accessories out of the oven.
^
Turn the function selector to
Pyrolytic
^
.
PY I
h
PY
appears in the display.
The number and the
h
(Start) symbol
will flash.
^
You can choose between
PY I
and
PY 2
by pressing
P
or
O
.
Cleaning and care
45
