Using oven sprays on very stubborn
soiling
Remove the catalytic back panel,
side liners and roof panels before
using oven sprays. The chemicals
used in oven sprays will damage
catalytic enamel, rendering it inef-
fective.
Some oven cleaners contain strong
alkalines and / or abrasive ma-
terials. Because PerfectClean ena-
mel is designed to be easily
cleaned the use of these cleaners is
not recommended.
However, if you still cannot get the
surface clean, an oven cleaner can
be used for a couple of minutes
only.
Do not attempt to use on a hot oven.
Allow the PerfectClean surfaces to cool
down to room temperature before ap-
plying oven sprays!
Apply oven cleaner to soiled areas and
leave to take effect for
a couple of
minutes only!
If necessary use a soft sponge (e.g.
the Vileda sponge supplied with the
oven), soft nylon brush or a scraper
suitable for glass surfaces to loosen
the soiling.
Repeat the process if necessary.
After cleaning rinse thoroughly with
clean water and then dry thoroughly.
Always remove all trays and racks
not being used when using the
oven to get the best results and to
keep cleaning of the trays to a mini-
mum.
Cleaning and care
60
