Timer - use
Time of day – 24 hour display
When the colon in the time display:
– flashes:
Once the time has been entered it
proceeds in minute intervals.
– is on constantly:
Time of day has been halted and
can be entered or altered.
When the appliance is first con-
nected to the power supply, or after a
power cut
"12:00" and the symbols
“
f
” and “
)
” flash in the display.
If a process has been pre-program-
med, the time of day can not be alte-
red or cancelled.
To enter the time of day:
Press the buttons “
f
” and “
)
” at
the same time.
“12:00" will show constantly in the dis-
play.
Using the -/+ button enter the time of
day in hours : minutes.
To alter the time of day
This is the same procedure as for set-
ting the time of day
Press buttons “
f
” and “
)
” at the
same time.
This halts the time of day.
Use the – /+ button to enter the new
time of day in hours : minutes.
To cancel the time of day display
Press the buttons “
f
” and “
)
”
twice in succession.
Pressed once, the time display colon
stays on constantly. Pressed twice the
display clears. The time of day continu-
es to run unseen.
To bring back the visible time display
Press buttons “
f
” and “
)
”
together once.
26
