Electrical connection
@ä
Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installations.
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The data plate, located on the right-
hand side below the control panel,
gives the necessary
connection
rating
, which must be according to na-
tional and local standards.
When contacting the Service Depart-
ment, please quote the voltage, model
and serial numbers given on the data
plate.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test certificates awarded . . . . . . . . . . .
. . . . . . . . Electrical Safety, C-Tick Mark
Electrically suppressed acc. to . . . . . .
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044
@
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
ä
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
49
Summary of Contents for H 213 B2
Page 4: ...Description of the appliance H 213 B2 4 ...
Page 51: ...51 ...