![background image](http://html.mh-extra.com/html/miele/g-8050/g-8050_operating-instructions-manual_234845005.webp)
~
Installation, maintenance and
repairs should be performed only by
technicians authorized by the
manufacturer.
Improper installation and maintenance
or repairs can pose significant hazards
to the user; note that the manufacturer
will not be held liable for such hazards.
~
If the power cord is damaged, a
special cord must be installed by a
Miele-authorized technician.
~
The commercial dishwasher should
only be placed into operation and
serviced by Miele Customer Service, an
authorized Miele dealer or a qualified
technician.
~
To ensure safe operation, use the
commercial dishwasher only after it has
been correctly installed into place.
~
NEVER open the
commercial-dishwasher housing. Any
contact with live connections or any
changes to the electrical or mechanical
setup will endanger you and may
impair the functioning of the
commercial dishwasher.
~
Defective components should be
replaced by Miele original parts only.
Only these parts are guaranteed by the
manufacturer to comply with safety
requirements.
~
Do not connect the commercial
dishwasher to the power supply by
means of an extension cord or power
strip, as these do not guarantee the
required safety of the commercial
dishwasher (and could cause
overheating, for example).
~
A damaged commercial dishwasher
can jeopardize your safety. Immediately
shut down the damaged commercial
dishwasher and notify Miele Customer
Service, an authorized Miele dealer or a
qualified technician.
~
Before performing installation and
maintenance work or repairs, the
commercial dishwasher must be
disconnected from the power supply.
The commercial dishwasher is NOT
disconnected from the power supply
unless one of the following conditions is
met:
– The fuses or circuit breakers are
tripped.
– The screw-in type fuses are fully
unscrewed.
– The power cord is disconnected from
the electrical system.
To disconnect a commercial
dishwasher with a plug, grasp the
plug itself and pull. Do not pull on the
power cord.
Safety instructions and warnings
5
Summary of Contents for G 8050
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved Publication date 02 08 2011 M Nr 07 950 142 00 ...