Priming the liquid dispensing
system
Before using the washer/disinfector for
the first time, or if the washer/disinfector
has been operated with an empty de-
tergent container, the dispensing sys-
tem must be primed. Please proceed
as follows:
^
Press the ON/OFF button to turn the
washer/disinfector off.
^
Using a long, thin object (e.g.,
straightened paper clip), press in
switch "B", located on the left hand
end of the control panel, for 3
1
/
2
min-
utes.
Each time the system is primed, any
detergent which runs into the wash
cabinet must be washed out by running
the RINSE cycle.
After this cycle is run, the dispensing
system is filled and ready for use.
Adding detergent
33
